Dosen

Prof. Dr. Ir. Adi Suryosatyo

adisur@eng.ui.ac.id Gasifikasi, Pembangkitan Daya

(Ir. UI, 1996; M.Sc. UTM-Malaysia, 1999; Dr. UTM-Malaysia, 2002)

Representative Publications :

  • Adi Suryosatyo, “Studi Kinerja Swirl Gas Burner Di Sistem Gasifikasi Biomass”
  • Adi Suryosatyo,  “Study of Characteristic Experimental Combustion of Coconut Shell In a Fluidized Bed Incinerator UI”, Proceeding of The 11Th International Conference On Quality In Research (QIR) 2009

Penelitian:

  1. Investigasi kinerja gas Burner di Sistem Gasifikasi Batu Bara dan Biomassa dengan Menggunakan Combustion Unit Equipment (CUE) ( tahun 2009).
  2. Peningkatan kinerja gas burner di sistem gasifikasi batubara dan briket untuk pembakaran tungku karamik dalam rangka implementasi energi alternatif di industri kecil ( tahun 2007)
  3. Optimalisasi Operasional Fluidized Bed Combuster Untuk Pembakaran Limbah Organik Padat (2010)

Agung Subagio

agsub@eng.ui.ac.id

Pembangkit daya

(Ir. UI, 1977; Dipl.Ing. Karlsruhe Institute of Technology-Germany, 1982)

Representative Publications :


Agung  S. Saragih

ashamsuddin@eng.ui.ac.id

Teknik Manufaktur, Microfabrication

(ST. UI, 2004; MS.Eng. Yeungnam Univ. – South Korea, 2007; Dr. Yeungnam Univ. – South Korea, 2014)

Representative Publications :

  • “Digital maskless lithography capabilities for surface texturing with biomachining”. International Journal of Advanced Manufacturing Technology. 2016
  • “Sum of sinusoidal plus noise model to extract component error from a double ballbar measurement error map”. Transactions of the Canadian Society for Mechanical Engineering .2013
  • “Development of digital lithography masking method with focusing mechanism for fabrication of micro-feature on biomachining process”. Journal of Mechanical Science and Technology. 2013
  • “Extracting single source geometric error value from a double ballbar measurement error map”.  Applied Mechanics and Materials. 2013
  • “Digital lithography masking method on fabrication of precise uniform micro-feature array with 16 μm resolution”. Proceedings – ASPE 2012 Annual Meeting. 2012
  • “Metal based micro-feature fabrication using biomachining process”. Microelectronic Engineering. 2012
     

Agus S. Pamitran

pamitran@eng.ui.ac.id

Aliran Dua Fasa, Teknik Pendingin

(ST. UI, 1999; M.Eng. Chonnam University, 2004; Dr. Chonnam Univ., 2009)

Representative Publications :

  • “Effect of superficial velocity on vaporization pressure drop with propane in horizontal circular tube”. AIP Conference Proceedings. 2016
  • “Thermofluids on renewable energy, refrigeration and air conditioning, and flame and combustion”. International Journal of Technology. 2016
  • “Void fraction of flow boiling with propane in circular horizontal tube”. International Journal of Technology. 2016
  • “Optimization of the friction factor and frictional pressure drop of R22 and R290”. International Journal of Technology. 2016
  • “Modeling of the minimized two-phase flow frictional pressure drop in a small tube with different correlations”. International Journal of Technology. 2016
  • “Research frontiers in energy, materials, production, and transportation”. International Journal of Technology. 2015
  • “Prediction of the Optimized Frictional Pressure Drop in a Two-phase Flow Small-channel with Genetic Algorithm”. Energy Procedia. 2015
  • “Characteristics of sea-water ice slurry for cooling of fish”. Applied Mechanics and Materials. 2013
  • “A review paper of sea-water ice slurry generator and its application on Indonesian traditional fishing”. Applied Mechanics and Materials. 2013
  • “Evaporation heat transfer coefficient in single circular small tubes for flow natural refrigerants of C3H8, NH3, and CO2”. International Journal of Multiphase Flow. 2011
  • “Experimental investigation on two-phase flow boiling heat transfer of five refrigerants in horizontal small tubes of 0.5, 1.5 and 3.0 mm inner diameters”. International Journal of Heat and Mass Transfer. 2011

Penelitian:

  1. Boiling Pressure Drop and Heat Transfer of Natural Refrigerants for Design Parameters of Small-Tube Evaporator
  2. Tube Inclination Effect on Pressure Drop and Heat Transfer Coeficient of Two-Phase Flow Boiling of Refrigerants for Design Parameter of Evaporator
  3. Optimasi Koefisien Perpindahan Kalor pada Aliran Dua Fase Refrigeran untuk Parameter Perancangan alat Pemindah Kalor Kanal Mikro

 

Ahmad Indra Siswantara

a_indra@eng.ui.ac.id

Computational Fluid Dynamics (CFD), Mekanika Fluida

(Ir. UI, 1991; Dr. UTM – Malaysia, 1997)

Representative Publications :

  • “CFD simulation of turbulent flows in proto X-3 bioenergy micro gas turbine combustor using std k-ε and rng k-ε model for green building application”. International Journal of Technology. 2016
  • “Cfd analysis of slurry flow in an anaerobic digester”. International Journal of Technology. 2016
  • “Turbulent flow analysis in auxiliary cross-flow runner of a Proto X-3 Bioenergy micro gas turbine using RNG K-ε turbulence model”. ARPN Journal of Engineering and Applied Sciences. 2015
  • “Modification of Biodiesel Reactor by Using of Triple Obstacle within the Bubble Column Reactor”. Energy Procedia. 2015

Penelitian :

  1. Permodelan PEM Fuel Cell untuk Konsumsi Daya Listrik Bangunan Zero Energi (tahun 2009)

 


Ardiyansyah

ardiyansyah@eng.ui.ac.id

Heat Transfer, Refrigeration

(ST. UI, 2002; M.Eng. Chonnam Univ. 2007; Ph.D. Oklahoma State Univ., 2015)

Representative Publications :

  • “Fiscal Instruments To Support The Environmental Friendly Product Development In Indonesia : Hybrid Vehicle”. Energy Procedia. 2015
  • “Pengaruh Pelumas Refrijeran Pada Kinerja Alat Penukar Kalor Microchannel Sistem Tata Udara”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV)
  • “Hydrocarbon Refrigerant Application In Indonesia”. The 14th International Conference On QIR (Quality in Research)

Penelitian:

  1. Design and Development of Absorption Refrigeration System for Refrigerated Food Road Transport Vehicle
  2. Pemanfaatan Panas Gas Buang Motor Pengangkut Ikan Sederhana sebagai Sumber Panas Generator Sistem Pendingin Absorpsi Amonia-Air

Ario Sunar Baskoro

ario@eng.ui.ac.id

Welding Engineering, Robotika, Mekatronika

(ST. UI, 1998; MT. UI 2004; M.Eng. – Keio University, 2006; Dr. Keio Univ, 2009)

Representative Publications :

  • “Development of travel speed detection method in welding simulator using augmented reality”. ICACSIS 2015 – 2015 International Conference on Advanced Computer Science and Information Systems, Proceedings. 2016
  • “The effect of welding time and welding currents on weld nugget and tensile properties of thin aluminum A1100 by micro resistance spot welding”. ARPN Journal of Engineering and Applied Sciences. 2016
  • “Effect of pressure and length of lap joint on shear load and joint clearance during dissimilar metal joining using torch brazing for the shipping industry”. International Journal of Technology. 2015
  • “Tote box manufacturing information systems for 300 kCi gamma irradiators”. International Journal of Technology. 2015
  • “Development of interaction and orientation method in welding simulator for welding training using augmented reality”. Proceedings – ICACSIS 2014: 2014 International Conference on Advanced Computer Science and Information Systems. 2014
  • “Development of real-time roughness monitoring during painting proses for cold rolled steel for national electric vehicle body materials”. Proceedings of 2014 International Conference on Electrical Engineering and Computer Science, ICEECS 2014. 2014
  • “Effects of welding time and welding current to weld nugget and shear load on electrical resistance spot welding of cold rolled sheet for body construction”. Proceedings of 2014 International Conference on Electrical Engineering and Computer Science, ICEECS 2014. 2014
  • “Effects of high speed tool rotation in micro friction stir spot welding of Aluminum A1100”. Applied Mechanics and Materials. 2014
  • “Improvement of Tungsten Inert Gas (TIG) Welding Penetration Using the Effect of Electromagnetic Field”. Applied Mechanics and Materials. 2014
  • “Development of pressure torch brazing system”. Applied Mechanics and Materials. 2014
  • “Experiment and numerical study – Effects of crush initiators under quasi-static axial load of thin wall square tube”. Applied Mechanics and Materials. 2014
  • “Analysis of Microchannels Manufacturing of Acrylic Using Low Power CO2 Laser”. Advanced Materials Research. 2013
  •  “Effects of Welding Parameters in Micro Friction Stir Lap Welding of Aluminum A1100”.  Advanced Materials Research. 2013
  • “Forming technique for cold rolled steel produced by PT krakatau steel for national electric vehicle body materials”. Proceedings of the 2013 Joint International Conference on Rural Information and Communication Technology and Electric-Vehicle Technology, rICT and ICEV-T 2013. 2013
  • “Development of platform structure as protection to lithium batteries in electric vehicle during crash impact”. Proceedings of the 2013 Joint International Conference on Rural Information and Communication Technology and Electric-Vehicle Technology, rICT and ICEV-T 2013. 2013

Penelitian:

  1. Micro Friction Stir Welding (FSW) for Thin Alumunium
  2. Pengembangan Mesin Laser Cutting Otomatis Daya Rendah dengan Gerakan 3 Axis untuk Aprlikasi Biomedis
  3. Peningkatan Efisiensi Sistem Pengelasan Tungsten Inert Gas (TIG) dengan Pemanfaatan Medan Elektromagnetik
  4. Pengembangan Mesin Rapid Prototyping berbasis Fused Deposition Modelling (FDM)
  5. Pengembangan 5-axis Welding dengan bantuan Machine Vision

Prof. Dr. Ir. Bambang Sugiarto, M.Eng

bangsugi@eng.ui.ac.id

Motor Pembakaran Dalam

(Ir. UI, 1985; M.Eng. Hokkaido Univ., Japan, 1991; Dr. Eng. Hokkaido Univ., Japan, 1994)

Representative Publications :

  • “Dynamics Vehicle Emissions Reduction With Technical and Behavior Approach”. International Journal of Technology. 2016
  • “Optimization Of Low-Grade Bioethanolcompact Distillator Using Waste Heat Motorcycle”. The 14th International Conference On QIR (Quality in Research)
  • “The Integrated Methodological Development Of Reliability, Risk And Condition-Based Maintenance In The Improvement Of The Thermal Power Plant Availability”. The 14th International Conference On QIR (Quality in Research)
  • “Karakterisasi Pembentukan Deposit Pada Ruang Bakar Mesin Diesel Dengan Metode Tetesan Pada Pelat Panas”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV)

Penelitian :

  1. Re-Formulasi Biodiesel Sawit-Jatrophacastor Optimasi Key Properties & Karakterisasi Pembakaran Pada Mesin Diesel (tahun 2009)
  2. Pendekatan Model Dinamik dari Program Busway sebagi Implementasi Kebijakan Pengurangan Kemacetan Lalu Lintas dan Polusi (Tahun 2008)
  3. Studi Polusi Udara Jakarta Dengan Pendekatan Intensi Masyarakat Pengguna Busway (2010)
  4. Studi Pemanfaatan Ethanol Low Grade sebagai Bahan Bakar Alternatif untuk Mesin Oto (2010)

Prof. Dr. Ir. Bambang Suryawan

suryawan@eng.ui.ac.id

Termofluida, Rekayasa Kendaraan dan Alat Berat, Rekayasa Kendaraan Rel

(Ir. UI, 1972; MT. UI, 1994; Dr. UI, 2004)

Representative Publications :

  • Bambang Suryawan; Awaludin Martin; M. Idrus Alhamid; Nasruddin; Maghribi, “Peningkatan Kualitas Karbon Aktif Sebagai Adsorber Dari Batubara Riau Melalaui Proses Oksidasi”, Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII. 2009
  • Awaludin Martin; Bambang Suryawan; M. Idrus Alhamid; Nasruddin , “Preparation of Activated Carbon from Low Rank Coal with CO2 Activation”, The 2nd International Meeting on Advanced Thermo-Fluid (IMAT 2009)

Prof. Dr. Ir. Budiarso, M.Eng

mftbd@eng.ui.ac.id

Mekanika Fluida, Sistem Optimasi Energi

(Ir. UI, 1977; M.Eng. NUS, 1996; Dr. UI)

Representative Publications :

  • “The effect of plasma actuator on the depreciation of the aerodynamic drag on box model”. AIP Conference Proceedings. 2016
  • “The effect of plasma actuator placement on drag coefficient reduction of Ahmed body as an aerodynamic model”. International Journal of Technology. 2016
  • “Turbulent flow analysis in auxiliary cross-flow runner of a Proto X-3 Bioenergy micro gas turbine using RNG K-ε turbulence model”. ARPN Journal of Engineering and Applied Sciences. 2015
  • “Drag reduction and velocity profiles distribution of crude oil flow in spiral pipes”. International Review of Mechanical Engineering. 2015
  • “Effect of active control by blowing to aerodynamic drag of bluff body van model”.  International Journal of Fluid Mechanics Research. 2013.
  • “Active technique by suction to control the flow structure over a van model”. AIP Conference Proceedings. 2012

Penelitian :

  1. Aerothermodynamics study of smoke detection as basis for Development of portable smoke detector assesment techniques (2008)
  2. Minyak Jarak Kaliki (Ricinus Communis) sebagai Minyak Pelumas Alternatif (2006)

 


Budihardjo

budihardjo@eng.ui.ac.id

Termodinamika, Teknik Refrigerasi dan Tata Udara

(Ir. UI, 1977; Dipl.Ing. Karlsruhe Institute of Technology, 1981; Dr. UI, 1998)

Representative Publications :

  • “Experimental and Simulation Study On The Performance Of Counter Flow Closed Cooling Tower Systems”. International Journal of Technology, Volume 6 Issue 3.
  • “Pengujian Performa Sistem Pendingin Absorpsi Dengan Energi Panas Matahari Di Universitas Indonesia Depok”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV)
  • “Contaminant Dispersion Analysis In Interim Storage For Spent Nuclear Fuel Building”. The 14th International Conference On QIR (Quality in Research)
  • “Perencanaan Sistem Pendingin Udara Masuk Gas Turbin 15°C Menggunakan Absorption Chiller di PLTGU UBP Priok”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV 9SNTTM XIV). 2015
  • “Optimization Position And Tilt Angle For Automatic Tracking Solar Collector In Solar Thermal Cooling System Of Building MRC FTUI”. The 2nd International Conference On Kinematics, Mechanics Of Rigid Bodies, And Materials (MECHKINEMATICS 2014)
  • “Analisis Konsumsi Energi Pada Gedung Perkantoran Di Jakarta”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIII (SNTTM XIII)
  • “Kajian Sistem Pendinginan Udara Masuk Turbin Gas Untuk Menaikan Daya Keluaran Turbin Gas PLTG Gilimanuk Yang Beroperasi Pada Waktu Beban Puncak”. Proceeding Seminar Nasional Tahunan Teknik Mesin  XIII (SNTTM XIII)

Penelitian:

  1. Rancang Bangun dan Untuk Kerja Mesin Refrigerasi Siklus Absorpsi Menggunakan Fluida Kerja LiBr + H2O + Additive yang Ramah Lingkungan (2010)

Engkos A. Kosasih

kosri@eng.ui.ac.id

Heat Transfer, Teknik Pengering, Metode Numerik, Teknik Pengaturan

(Ir. UI, 1991; MT. ITB, 1996; Dr. UI, 2006)

Representative Publications :

  • “Void Fraction Of Flow Boiling With Propane In Circular Horizontal Tube”. International Journal Of Technology (IJTech).  2016
  • “Optimization Of Hydrogen Storage Capacity By Physical Adsorption On Open-Ended Single-Walled Carbon Nanotube As Diameter Function”. International Journal Of Technology (IJTech).  2016
  • “Combination Of Electric Air Heater And Refrigeration System To Reduce Energy Consumption : A Simulation Of Thermodynamics System”. International Journal Of Technology (IJTech).  2016
  • “Characteristics Of Vortex Ring Formation By Synthetic Jet Actuators In Different Cavities”. International Journal Of Technology (IJTech).  2016
  • “Effect of hot air reservoir and insulator tray in the development of vacuum freeze drying”. Applied Mechanics and Materials. 2013
  • “Forced cooling on a heated wall with impinging flow configuration using synthetic jet actuator under combined wave excitation”. Jurnal Teknologi (Sciences and Engineering). 2012
  • “Analysis of water mist density profile for two nozzle interaction using image processing technique”. AIP Conference Proceedings. 2012
  • “Development of a compact vacuum freeze drying for jelly fish (schypomedusae)”. Jurnal Teknologi (Sciences and Engineering). 2012
  • “Active technique by suction to control the flow structure over a van model”. AIP Conference Proceedings. 2012
  • “Enhancement Of Hidrogen Physisorption Energy By Lithium-Doped Carbon Nanotube : A First Priniples Study”. Journal Of Clean Energy Technologies.
  • “Karakteristik Pembentukan Cincin Vorteks Pada Jet Sintetik Akibat Perubahan Frekwensi Eksitasi Pada Aktuator Ber-Cavity Kerucut”. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTM XIV). 2015
  • “Characterization of Thermal Properties and Thermal Cycling of RT 22 HC-Nano Graphene”.
  • “Pengaruh Laju Aliran, Kelembaban Dan Temperatur Udara Pengering Terhadap Kinerja Pengering Semprot Pada Tekanan Udara Nozel Pneumatik 2 Bar Absolut”. Proceeding Seminar Nasional Tahunan Teknik Mesin  XIII (SNTTM XIII). 2014

Penelitian :

  1. Laju Penguapan Tetesan dan Pengaruh Jenis dan Konsentrasi Zat Terlarut pada Penguapan (Tahun 2008)
  2. Pemodelan Laju Penguapan Tetesan Tunggal Air dalam Udara, pada Perpindahan Massa yangTinggi serta Pengharuh Zat Terlarut dan Aditif ( Tahun 2006)

 

Firman

 

 

 

 

 

 

 

 

 

Firman Ady Nugroho

f.adyngugroho@gmail.com

Ship Materials

(S.T. UI, 2010; M.T. UI, 2013)

Representative Publications :

 

 

 

 

 

 

 

 


ganjar

 

 

 

 

 

 

 

 

 

 

 

Prof. Dr. Ir. Gandjar Kiswanto, M.Eng.

gandjar_kiswanto@eng.ui.ac.id

Intelligent Manufacturing System, Otomasi – Robotika, Advanced CAD/CAM, Multi-axis Machining

(Ir. UI, 1995; M.Eng. KU Leuven Belgium, 1998; Dr. KU Leuven Belgium, 2003)

Representative Publications :

  • Gandjar Kiswanto; Zulhendri; Benito H; Priadhana E , “Multy-Axis Milling Optimization Through Implementation of Proper Operation Strategies in Machining Processes”, Proceeding of The 11Th International Conference On Quality In Research (QIR) 2009
  • Gandjar Kiswanto; Budi Haryanto; Gatot Eka Pramono, “Identifikasi Fitur Kekasaran Permukaaan Berbasis Vision Untuk Produk Hasil Pemesinan”, Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII. 2009
  • Gandjar Kiswanto; Ahmad Kholil, “Pengembangan Laser Trajectory Proses Rapid Prototyping Untuk Produk Berkontur Dan Prismatik”, Seminar Nasional Tahunan Teknik Mesin (SNTTM) VIII. 2009

Penelitian:

  1. Development of Realtime Integrated Tool Path Generation and Tracking for 3-axis Micro Milling based on discrete models (2010)
  2. Development of 5-Axis Micro Milling Machine and Its Tool Path Generation Methods Based on Discrete Models with Feature-based Machining-Complexity Analysis (2010)

gatot

 

 

 

 

 

 

 

 

 

 

Gatot Prayogo

gatot@eng.ui.ac.id

Mekanika Patahan (fracture mechanics), Mekanika Kekuatan Material

(Ir. FTUI, 1984; M. Eng. Toyohashi Univ. of Technology-Japan, 1992; Dr. UI, 2011)

Representative Publications :

  • Gatot Prayogo, Evaluasi Terhadap Modified Thread Connection Alat Pengeboran Minyak Bumi,Prosiding Seminar Nasional Teknik Mesin. 2 14-15 Februari 2007 Universitas Kristen Petra Surabaya.
  • Gatot Prayogo, Analisa Umur Fatik Drum-Brake Achor-Pin Sepeda Motor, Seminar Nasional Tahunan Teknik Mesin ( SNTTM )- VII, 4-6 Nov 2008 Swiss Belhotel Malcosan Manado

Penelitian: 1. Pengembangan material natural komposit (2010)


gerry

 

 

 

 

 

 

 

 

 

 

Gerry Liston Putra

gerrylp@eng.ui.ac.id

Ship Structures

Material Kapal (ST. UI, 2011; MT. UI, 2013; Cand. Doctor, Hiroshima University)

Representative Publications :

 


gunawan

 

 

 

 

 

 

 

 

 

 

Gunawan

gunawan_kapal@eng.ui.ac.id

Ship Machinery, Resistance and Propulsion System

(ST. UI, 2010; MT. UI, 2012; Cand. Doctor Hiroshima University)

Representative Publications :

 

 


hadi

 

 

 

 

 

 

 

 

 

Hadi tresno Wibowo

hadi@eng.ui.ac.id

Struktur Kapal, Proses Permesinan

(Ir. UI, 1982; MT. UI, 2010)

Representative Publications :

 


harinaldi

 

 

 

 

 

 

 

 

 

 

Prof. Dr. Ir. Harinaldi, M.Eng

harinald@eng.ui.ac.id

Rekaya Termofluida, Dinamika Fluida Sistem Bereaksi, Statistik Teknik

(Ir. UI, 1992; M.Eng. Keio Univ. Japan, 1997; Dr.Eng. Keio Univ. Japan, 2001)

Representative Publications :

  • Harinaldi, Effects of Parallel and Zigzag Blade Configurations and Flow Passage in Casing Cover on Centrifugal Pump Peformance,Proceeding The 10th International Conference on Quality in Research ( QIR ) 4-6 Des 2007
  • Harinaldi, Dinamika Instabilitas Antarmuka pada Proses ” Fingering ” Dalam Aliran Fluida Viskos Melalui Celah Sempit. Seminar Nasional Tahunan Teknik Mesin ( SNTTM )- VIII, Semarang 11-14 Agustus 2009

Penelitian:

  1. Pengembangan Kontrol Aktif Separasi Aliran Turbulen Sebagai Metode yang Efektif dalam Meningkatkan Performa Aerodinamika Kendaraan Penumpang (2010)
  2. Pengembangan Si